Description
You get all the advantages of perfect quality water with Ecosoft MO12000 commercial reverse osmosis system. It is the most advanced and effective way to remove up to 99.8% of impurities, including bacteria and viruses. Reverse osmosis is an eco-friendly and economic way to get safe drinking water.
The system is a compact and entirely functionally complete module.
ОС5000 controller for constant independent operation of the system
The OC5000 controller is designed for automatic or manual control of reverse osmosis unit and provides:
Controller ОС 5000 — best possibilities for professional maintenance:
- automatic switching on and off of the equipment upon signal;
- emergency shutdown of the equipment by signals from dry-running sensors, overpressure in the module;
- shutdown of equipment on the external STOP signal;
- hydraulic flushing of membranes;
- permanent quality control (electrical conductivity and temperature) of permeate.
![](https://h2o.co.za/wp-content/uploads/2019/11/oc_5000_1-300x170.jpg)
Maintenance
For correct and effective system operation it is necessary to do the following:
A history of system maintenance and operation in the personal online directory will allow the most efficient and timely replacement of filters, chemical washing of membranes and other system maintenance activities.
Replace the
sediment filters
at least once every 3 months.
The sediment filter protects the RO membrane from large impurities such as sand, clay particles, etc.
Carry out chemical cleaning of the RO membrane
At least twice a year.
CIP should be carried out in case of deteriorating purified water quality or capacity reduction, which you can observe in the personal online directory. CIP is carried out by using a chemical cleaning unit and cleaning chemicals.
Keep a register of maintenance, system operational parameters and water quality.
A history of maintenance and operation of the system will allow the most efficient and timely change replacement filters, chemical washing of membranes and other system maintenance activities.
You don’t need to keep a system maintenance log anymore!
Timely maintenance expands the lifetime of the equipment, but also provides pure and safe water of the highest quality.
Who is the product for?
Ecosoft MO 12000 RO system is designed for water purification in:
- Restaurants, Hotels and Hospitality;
- Breweries, Beverage Production and Bakeries;
- Laboratories and Workshops
- Car Wash and Laundry
- Technological Processes, Factories and Agriculture;
- Steam Boilers, Heating and cooling systems
Specifications
Specifications
Operational characteristics and technical data
Parameter
|
Units
|
Value
|
Flow capacity at 15°С1
|
m3/hour
|
0.45
|
RO elements
|
2
|
40×40
|
Power supply
|
|
230 V, 50 Hz
|
Pump power
|
kW
|
0.7
|
Inlet pressure
|
bar
|
2…42
|
Operation pressure in the RO membrane
|
bar
|
8…12
|
Water consumption in operating mode
|
m3/hour
|
0.65…0.8
|
Water consumption in flush mode
|
m3/hour
|
1.5…2.0
|
Connection port sizes:
-
feed water
-
permeate
-
concentrate
|
|
½”
½”
½”
|
System dimensions (H x W x D), mm
|
mm
|
550 х 420 х 1500
|
1 capacity of the RO system depends on feed water composition and its temperature
2 for stable operation requires a constant pressure (+/- 0.5 bar) in the specified range
Feedwater requirements
Parameter
|
Units
|
Value
|
Temperature of feed water
|
°С
|
4…30
|
Residual chlorine, max
|
mg/L (ppm)
|
0.1
|
Hardness
|
meq/L
|
3 (301)
|
Iron
|
mg/L(ppm)
|
0.1 (0.51)
|
Manganese
|
mg/L(ppm)
|
0.05 (0.11)
|
Silicate
|
mg/L(ppm)
|
20 (2501)
|
Chemical oxygen demand
|
mg O2/L (ppm O2)
|
4
|
1 when using antiscalant, hardness and silica have higher limits
2 for reliable operation stable pressure needed (+/- 0.5 bar)
Components of the system
- Grundfos high-pressure pump
- European solenoid valves
- Multifunctional controller
- Conductivity sensor
- Sediment filter
- High and low-pressure switches
- Float switch
- Regulated discharge and recycle flow meter
- Vibration resistant pressure gauges
- Frame with a unique design
Options
- Filmtec™ ХLE-4040 / LCLE-4040 or Ecosoft ELP-4040 membranes
- Dosing pump for antiscalant
- A versatile set for raw water blending (30…240 L/h) or permeate flushing
Maintenance
Maintenance
![drops.png drops.png](https://ecosoft.com/upload/medialibrary/2c2/drops.png)
Pre-filters
Sediment filters protect the membrane from large impurities such as sand, clay particles, etc. Failure to replace the filters in due time can damage or destroy the membrane. In order to avoid such critical situations, we recommend changing the filter at least once every 3 months..
![jerrycan (1).png jerrycan (1).png](https://ecosoft.com/upload/medialibrary/586/jerrycan-_1_.png)
Clean-in-place
In case of worsening quality of the treated water or a decrease in productivity, it is necessary to conduct chemical cleaning of the RO membrane with a CIP-station and special reagents. To obtain purified water of high quality, we recommend chemical cleaning at least twice a year.
![no-water.png no-water.png](https://ecosoft.com/upload/medialibrary/975/no_water.png)
Long downtime
If you do not plan to use the system for a long time, it is necessary to shut off the water supply to the system, and soak the membrane elements in a special preservative solution – this will keep the membranes working when the equipment is not in use.
![organize.png organize.png](https://ecosoft.com/upload/medialibrary/2e0/organize.png)
Operating log
It is recommended to keep maintenance register for the reverse osmosis system and a log book of the system performance and water quality. The data will help to remember to replace the filters, chemical cleaning of membranes and other maintenance operations connected to the system service.
Downloads
Downloads
Manuel for Ecosoft Reverse Osmosis systems
Reviews
There are no reviews yet.